Saurabh Basu

Journal Articles

• Zhiyu Wang, Mustafa Rifat, Christopher Saldana and Saurabh Basu, 2018, "Quantifying the spread in crystallographic textures due to transients in strain path in shot-peening", Materialia, 2, pp. 18
• Sepideh Abolghasem, Saurabh Basu, Shashank Shekhar and M. Ravi Shankar, 2018, "Mapping dislocation densities resulting from severe plastic deformation using large strain machining", Journal of Materials Research, 33, (2)
• Zhiyu Wang, Saurabh Basu and Christopher Saldana, 2018, "Gradient microstructure and texture in wedge-based severe plastic burnishing of copper", Journal of Materials Research
• Amey Vidvans and Saurabh Basu, 2017, "Smartphone based scalable reverse engineering by digital image correlation", Optics and Lasers in Engineering, 126, pp. 10
• Haipeng Qiao, Saurabh Basu, Soundar Kumara and Christopher Saldana, 2017, "Subsurface damage in milling of lightweight open-cell aluminium foams", Proceedia CIRP, 66, (1), pp. 4
• Zhiyu Wang, Saurabh Basu and Christopher J Saldana, 2017, "Low-temperature machining in a fully submerged cryogenic environment", Machining Science and Technology, 21, (1), pp. 8
• Marzyeh Moradi, Saurabh Basu and Meenakshisundaram Ravi Shankar, 2017, "Creation of ultrafine-grained surfaces by large strain extrusion machining (LSEM)", Machining Science and Technology, 21, (4), pp. 16
• Saurabh Basu, Zhiyu Wang and Christopher Javellana Saldana, 2016, "Deformation heterogeneity and texture in surface severe plastic deformation of copper", 472, (2187), pp. 20150486
• Saurabh Basu, Zhiyu Wang and Christopher Javellana Saldana, 2016, "Anomalous evolution of microstructure and crystallographic texture during indentation", Acta Materialia, 105, pp. 25–34
• Saurabh Basu, Zhiyu Wang, Ryan Liu and Christopher Javellana Saldana, 2016, "Enhanced subsurface grain refinement during transient shear-based surface generation", Acta Materialia, 116, pp. 114–123
• Zhiyu Wang, Saurabh Basu, TG Murthy and Christopher Javellana Saldana, 2016, "Modified cavity expansion formulation for circular indentation and experimental validation", International Journal of Solids and Structures, 97, pp. 129–136
• H Qiao, Saurabh Basu and Christopher Javellana Saldana, 2016, "Quantitative x-ray Analysis: Applications in Machining of Porous Metallic Foams", Procedia CIRP, 45, pp. 335–338
• R Gandhi, D Sebastian, Saurabh Basu, JB Mann, P Iglesias and Christopher Javellana Saldana, 2016, "Surfaces by vibration/modulation-assisted texturing for tribological applications", The International Journal of Advanced Manufacturing Technology, 85, (1-4), pp. 909–920
• Marzyeh Moradi, Saurabh Basu and M. Ravi Shankar, 2016, "Deformation mechanics and microstructure evolution during indirect extrusion in (sub) mm-scale samples", Journal of Materials Research, 31, pp. 1096–1112
• Saurabh Basu and M Ravi Shankar, 2015, "Crystallographic textures resulting from severe shear deformation in machining", Metallurgical and Materials Transactions A, 46, (2), pp. 801–812
• Marzyeh Moradi, Saurabh Basu and Meenakshisundaram Ravi Shankar, 2015, "In situ measurement of deformation mechanics and its spatio-temporal scaling behavior in equal channel angular pressing", Journal of Materials Research, 30, (06), pp. 798–810
• Saurabh Basu and M Ravi Shankar, 2014, "Microstructure evolution during severe shear deformation at small length-scales", Scripta Materialia, 72, pp. 51–54
• Saurabh Basu and M Ravi Shankar, 2014, "Spatial confinement-induced switchover in microstructure evolution during severe plastic deformation at micrometer length scales", Acta Materialia, 79, pp. 146–158
• M Gaussin, G Hu, S Abolghasem, Saurabh Basu, MR Shankar and B Bidanda, 2013, "Assessing the environmental footprint of manufactured products: A survey of current literature", International Journal of Production Economics, 146, (2), pp. 515–523
• Rathindranath Maiti, Indraneel Biswas, Vivek Nema, Saurabh Basu, Bhabani Sankar Mahanto and Bikash Routh, 2013, "Design and development of strain wave generating cam for a new concept ‘harmonic drive’", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227, (8), pp. 1870–1884
• Saurabh Basu, Sepideh Abolghasem and M Ravi Shankar, 2013, "Mechanics of Intermittent Plasticity Punctuated by Fracture During Shear Deformation of Mg Alloys at Near-Ambient Temperatures", Metallurgical and Materials Transactions A, 44, (10), pp. 4558–4566
• Sepideh Abolghasem, Saurabh Basu and M Ravi Shankar, 2013, "Quantifying the progression of dynamic recrystallization in severe shear deformation at high strain rates", Journal of Materials Research, 28, (15), pp. 2056–2069
• Shashank Shekhar, S Abolghashem, Saurabh Basu, J Cai and M Ravi Shankar, 2012, "Interactive Effects of Strain, Strain-Rate and Temperatures on Microstructure Evolution in High Rate Severe Plastic Deformation", 702, pp. 139–142
• S Shekhar, S Abolghasem, Saurabh Basu, J Cai and MR Shankar, 2012, "Effect of severe plastic deformation in machining elucidated via rate-strain-microstructure mappings", Journal of Manufacturing Science and Engineering, 134, (3), pp. 031008
• S Abolghasem, Saurabh Basu, S Shekhar, J Cai and M. Ravi Shankar, 2012, "Mapping subgrain sizes resulting from severe simple shear deformation", Acta Materialia, 60, (1), pp. 376–386
• Sepideh Abolghasem, Hu Guiping, Bopaya Bidanda, M Ravi Shankar and Saurabh Basu, 2012, "Sustainable Design and Manufacturing by Mapping Microstructure from Severe Shear Deformation in Machining", IFAC Proceedings Volumes, 45, (6), pp. 1278–1283
• Shashank Shekhar, Jiazhao Cai, Saurabh Basu, Sepideh Abolghasem and M Ravi Shankar, 2011, "Effect of strain rate in severe plastic deformation on microstructure refinement and stored energies", Journal of Materials Research, 26, (03), pp. 395–406
• Shashank Shekhar, Sepideh Abolghasem, Saurabh Basu, Jiazhao Cai and M Ravi, 2010, "Generating Micro And Sub-Micro Scale Periodic Surface Features Using Modulated Machining In Compliant Systems", Transactions of North American Manufacturing Research Institute/Society of Manufacturing Engineers (NAMRI/SME), 38, pp. 299–306
• Conference Proceedings
• Zhiyu Wang, Saurabh Basu and Christopher Saldana, 2017, "Subsurface Microstructure and Crystallographic Texture in Surface Severe Plastic Deformation Processes", ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, ASME
• Saurabh Basu, Zhiyu Wang and Christopher Javellana Saldana, 2016, "Modeling Evolution of Microstructures Beneath Topographically Textured Surfaces Produced Using Shear Based Material Removal", pp. V002T01A011–V002T01A011
• Saurabh Basu, Zhiyu Wang and Christopher Saldana, 2016, "Crystallographic textures produced during sand blasting", ASME 2016 11th International Manufacturing Science and Engineering Conference
• Marzyeh Moradi, Saurabh Basu and Meenakshisundaram Shankar, 2015, "Characterization of Deformation Mechanics and Microstructure Evolution During Indirect Extrusion in Small Length Scales", pp. V002T01A007–V002T01A007
• Zhiyu Wang, Saurabh Basu and Christopher Javellana Saldana, 2015, "Subsurface Deformation in Surface Mechanical Attrition Processes", pp. V002T01A013–V002T01A013
• Saurabh Basu and M Ravi Shankar, 2014, "Effect of Length Scales on Microstructure Evolution During Severe Shear Deformation", pp. V001T01A010–V001T01A010
• Amol Kulkarni, Amey Vidvans, Mustafa Rifat, Gregory Bicknell, Xi Gong, Guhaprasanna Manogharan, Janis Terpenny and Saurabh Basu, , "Scalable Detection of Defects in Additively Manufactured PLA Components", Proceedings of the ASME 2018 13th International Manufacturing Science and Engineering Conference MSEC2018
• Mustafa Rifat and Saurabh Basu, , "Characterizing Surface Defects in Additively Manufactured Components Using Smart-phone Imaging", Proceedings of Material Science and Technology 2018

Other

• Saurabh Basu, 2015, "Effect of Length Scales on Microstructure Evolution During Severe Plastic Deformation"